We provide customized solutions for different industries, from aerospace, medical components, electronics to the new energy industry, and more. CNC machining ensures the accuracy and quality of products.

At Jiangcheng, our ISO certified CNC workshop is specifically designed for rapid prototyping and small batch production of end use components. Jiangcheng CNC Factory provides you with 24-hour quotation service and rapid production of samples. We are your best choice for machining parts and can customize manufacturing according to your project requirements.

1.304 stainless steel

It is one of the most widely used and widely used austenitic stainless steels, suitable for manufacturing deep drawing formed parts, acid pipelines, containers, structural components, various instrument bodies, etc. It can also be used to manufacture non-magnetic and low-temperature equipment and components.

2.304L stainless steel

In order to address the serious intergranular corrosion tendency of 304 stainless steel caused by the precipitation of Cr23C6 under certain conditions, ultra-low carbon austenitic stainless steel has significantly better intergranular corrosion resistance in its sensitized state than 304 stainless steel. Except for slightly lower strength, other properties are the same as 321 stainless steel, mainly used for corrosion-resistant equipment and components that require welding but cannot undergo solid solution treatment. It can be used to manufacture various instrument bodies, etc.

3.304H stainless steel

The internal branch of 304 stainless steel has a carbon mass fraction between 0.04% and 0.10%, and its high-temperature performance is superior to that of 304 stainless steel.

4.316 stainless steel

Adding molybdenum on the basis of 10Cr18Ni12 steel gives the steel good resistance to reducing media and pitting corrosion. In seawater and various other media, the corrosion resistance is better than 304 stainless steel, mainly used as a corrosion-resistant material.

5.316L stainless steel

Ultra low carbon steel has good resistance to intergranular corrosion in sensitized state, and is suitable for manufacturing welded components and equipment with thick cross-sectional dimensions, such as corrosion-resistant materials in petrochemical equipment.

6. 316H stainless steel

The internal branch of 316 stainless steel has a carbon mass fraction between 0.04% and 0.10%, and its high-temperature performance is better than that of 316 stainless steel.

7. 317 stainless steel

The resistance to pitting corrosion and creep is superior to 316L stainless steel, used in the manufacturing of petrochemical and organic acid corrosion resistant equipment.

8. 321 stainless steel

Titanium stabilized austenitic stainless steel, with the addition of titanium to improve intergranular corrosion resistance and excellent high-temperature mechanical properties, can be replaced by ultra-low carbon austenitic stainless steel. Except for special occasions such as high temperature or hydrogen corrosion resistance, it is generally not recommended to use.

9. 347 stainless steel

Austenitic stainless steel stabilized with niobium can improve its intergranular corrosion resistance by adding niobium. Its corrosion resistance in corrosive media such as acid, alkali, and salt is the same as that of 321 stainless steel. It has good welding performance and can be used as both a corrosion-resistant material and a heat-resistant steel. It is mainly used in the fields of thermal power and petrochemicals, such as making containers, pipelines, heat exchangers, shafts, furnace tubes in industrial furnaces, and furnace tube thermometers.

10. 904L stainless steel

Super fully austenitic stainless steel is a type of super austenitic stainless steel invented by OUTOKUMPU company in Finland. Its nickel mass fraction is 24% -26%, and carbon mass fraction is less than 0.02%. It has excellent corrosion resistance and excellent resistance to non oxidizing acids such as sulfuric acid, acetic acid, formic acid, and phosphoric acid. It also has good resistance to crevice corrosion and stress corrosion. Suitable for various concentrations of sulfuric acid below 70 ℃, it has good corrosion resistance in any concentration and temperature of acetic acid and a mixture of formic acid and acetic acid under normal pressure. The original standard ASMESB-625 classified it as nickel based alloy, while the new standard classified it as stainless steel.

11. 440C stainless steel

Martensitic stainless steel has the highest hardness among hardenable stainless steel and stainless steel, with a hardness of HRC57. Mainly used for making nozzles, bearings, valve cores, valve seats, sleeves, valve stems, etc.

12. 17-4PH stainless steel

Martensitic precipitation hardening stainless steel, with a hardness of HRC44, has high strength, hardness, and corrosion resistance, and cannot be used at temperatures above 300 ℃. It has good corrosion resistance to the atmosphere and diluted acids or salts, and its corrosion resistance is the same as 304 stainless steel and 430 stainless steel. It is used for manufacturing offshore platforms, turbine blades, valve cores, valve seats, sleeves, valve stems, etc